1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns ) gap is allowed between

) gap is allowed between the end of the header and the face of the jamb stud

and other exposed wood structures where moisture and weather resistance are critical

The embedded anchors of the DETAL are preattached to the moisture barrier through slots that allow some adjustment during installation to avoid rebar

making them ideal for both temporary and permanent fastening jobs

Available Finishes: Choose between mechanically galvanized (N2000®) for corrosion protection or black phosphate for dry

1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns ) gap is allowed betweenWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".